The main benefits of our lubricating additives:

Excellent protection against extreme pressure | Reducing downtime | Less internal wear | Excellent finish Longer tool life and much more…

Aditivum NanoLub® IC-3000 AW/AF/EP

Demand

Benefits

  • Excellent ultra-pressure protection
  • Very low wear even under high load
  • Protection of tools, extended lifetime
  • Reduces coefficient of friction
  • Can be used at high or low temperature
  • Superior surface finishing.

Recommended for industrial and metal processing oil based lubricant formulation. Provides outstanding AW/AF/EP properties. This additive package provides ultra-pressure properties, excellent Anti-Wear properties even at high load and superior surface finishing to metal working fluids.

Applications

  • Excellent ultra-pressure protection
  • Very low wear even under high load
  • Protection of tools, extend their lifetime
  • Reduce coefficient of friction
  • Work with wide variety of metal
  • Can be used form low to high temperature
  • Rapidly dissipate heat
  • Will not smoke
  • Superior surface finishing
  • Typical treat rate 2-12.5% depending on severity of the operation

Technical Specs

  • Color: Dark Gray
  • Treat Rate: 2% – 12.5% by weight
  • Viscosity: 1600 cSt at 40°C
  • Density: 0.9 -0.97g/cm3
  • Flash Point: 152°C
  • Active Sulfur: None
  • Chlorine, Boron content: None

Industries

  • Metalworking
  • Gear Oils
  • Chain Oils
  • Bearing Oils

4-Ball Extreme Pressure Test on 52% Chlorinated Paraffins

4-Ball Extreme Pressure Test (Weld load, kgf)

NanoLub® IC-1000 AW/AF

Demand

Benefits

Extends Machinery Life
Reduce Downtime
Less Internal Wear
Extends Maintenance Intervals
Reduce Energy Consumption

A new generation surface-reconditioning additive to significantly improve the Anti-Wear and Anti-Friction properties of lubricants.

Applications

Specially formulated to significantly improve performance of lubricants
Anti-Friction (AF) and Anti-Wear (AW) properties
Can be used as part of the additive package of fully formulated ready to use oil or as a top off after market product.

Technical Specs

Color: Dark Gray
Treat Rate: 1% – 5% by weight
Carrier: Group V Oil
Viscosity: 600 – 750 cSt at 40°C
Density: 0.9 – 0.97g/cm3
Health: Non-toxic closed caged particles as per OECD protocols

Industries

Industrial
Automotive
Construction
Paper Mills
Mining

NanoLub® IC-3100 AW/AF/EP

Demand

Benefits

Excellent Extreme Pressure protection
Very low wear even under high load
Reduce coefficient of friction
Prevents micro pitting and surface fatigue
Shock absorbing properties

A high performing Anti-Wear, Anti-Friction and Extreme Pressure industrial lubricant for gear oils, chain oils, bearing oils, metalworking fluids, etc. Excellent AW/AF/EP properties at low treat rate.

Technical Specs

  • Color: Dark Gray
  • Treat Rate: 1% – 8% by weight
  • Viscosity: 89.8 cSt at 40°C
  • Density: 9.0 lb/gal
  • Flash Point: 152°C
  • Active Sulfur: None
  • Chlorine, Boron content: None

Industries

  • Mining
  • Heavy Duty
  • Automotive
  • High Temperature
  • Metal Forming operations
  • Gear oils
  • Chain oils and other industrial applications

4-Ball Wear Test ASTM D4172

4-Ball CoF Test ASTM D4172

4-Ball EP Test ASTM D4172

NanoLub® IS-2000 AW/AF

Demand

Benefits

  • Extends Machinery Life
  • Reduce Downtime
  • Less Internal Wear
  • Extends Maintenance Intervals
  • Reduce Energy Consumption

Improve performance of standard lubricants
:

  • Anti-Friction (AF) and Anti-Wear (AW) properties
  • Can be used as part of the additive package of fully formulated ready to use oil or as a top off after market product.

Technical Specs

  • Color: Dark Gray
  • Treat Rate: 1% – 5% by weight
  • Carrier: Group V Oil
  • Viscosity: 300 – 400 cSt at 40°C
  • Density: 0.9 – 0.97g/cm3
  • Health: Non-toxic closed cage particles as per OECD protocols

Industries

  • Industrial
  • Automotive
  • Construction
  • Paper Mills
  • Mining

Roller-on-Block ASTM G-77 Friction Coefficient

Roller-on-Block ASTM G-77 Wear Test Results

NanoLub® IW-4000 AW/AF/EP

Demand

Benefits

  • Superior Extreme Pressure protection. Low wear even under high load
  • Tool life increase up to 5 times
  • Improves heat transfer properties of water up to 20%
  • Can be added to all types of water dilutable metalworking fluids – soluble oils, semi synthetics, and synthetics.
  • not contain chlorinated paraffins
  • Reduction in coefficient of friction
  • Superior surface finishing
  • Avoid using sodium o-phenylphenate base biocides with corrosion inhibitor Sebacic acid in same formulation with Nanolub® IW-4000. It may cause instability of particles.

High performing Anti-Wear, Anti-Friction and Extreme Pressure water based additive. Use for metalworking and non flammable water soluble lubricants with superior cooling properties

Příklady použití

  • Superior Extreme Pressure protection. Very low wear even under high load
  • Improves heat transfer properties of water by 20%
  • Can be added to all types of water dilutable metalworking fluids – soluble oils, semi synthetics, and synthetics.
  • Safe, not contain chlorinated paraffins
  • Reduce coefficient of friction
  • Can be used from low to high temperature
  • Will not smoke
  • Superior surface finishing
  • Typical treat rate of 0.25%-4%. depending on the operation

Technical Specs

  • Color: Black
  • Treat Rate: 0.5% – 4% by weight
  • Health: Non-toxic close cage particles as per OECD protocols
  • Safety: REACH Compliant

Odvětví

  • Metalworking fluids
  • Synthetic and Semi-synthetic (emulsions)
  • Water based lubricants and coolants
  • Surface protecting soft coating (when sprayed, dipped and dried)

Test Falex (ASTM D3233A)

Extreme pressure with 4 balls (ASTM D2783)

4 balls third coefficient by EP

Opotřebení se čtyřmi kuličkami (ASTM D4172)

NanoLub® IW-4100 AW/AF/EP

Poptávka

Benefits

  • Superior extreme pressure protection
  • Reduce coefficient of friction
  • Reduce wear
  • Superior surface finishing
  • Non-flammable
  • Chlorine free

High performing Anti-Wear, Anti-Friction and Extreme Pressure water based additive. Use for metalworking and non flammable water soluble lubricants with superior cooling properties.

This additive is based on IF-WS2 dispersed solids with polymeric surfactants, that in addition to EP/AW/AF properties will provide surface binding and adhesion

Applications

  • Synthetic and semisynthetic metalworking fluids
  • Coolants
  • Nonflammable lubricants
  • Water based lubricants

Technical Specs

  • Color: Black
  • Treat Rate: 0.5% – 6% by weight
  • Health: Non-toxic close cage particles as per OECD protocols
  • Safety: REACH Compliant

Industries

  • Metalworking fluids
  • Synthetic; Semisynthetic (emulsions)
  • Water based lubricants and coolants
  • Surface protecting soft coating (when sprayed, dipped and dried)

4 balls EP (ASTM D 2783)

Koeficient tření NanoLub®

Wear with four balls (ASTM D 4172)

NanoLub® IW-4200 AW/AF/EP

Demand

This formulation is based on IF-WS2/Polymer. Recommended for metal forming applications (drawing, forging, stamping etc.). Provides excellent surface finishing.

Applications

  • Synthetic and semisynthetic metal forming fluids
  • Nonflammable lubricants
  • Water based lubricants
  • Cold forging, drawing, stamping operations

Technical Specs

  • Color: Dark Gray
  • Treat Rate: 10% – 45% by weight
  • Health: Non-toxic closed cage particles as per OECD protocols

Odvětví

  • Metalworking fluids
  • Synthetic; Semisynthetic (emulsions)
  • Water based lubricants and coolants
  • Surface protecting soft coating (when sprayed, dipped and dried)

Proven results